| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
16-Unit Automatic Pneumatic Consolidation Instrument Uniaxial Soil Consolidation Test Equipment Consolidation Device
Description
The fully automatic uniaxial soil consolidation apparatus series is a specialized instrument for soil consolidation testing, replacing single/multi-unit lever-type consolidation devices. It determines the relationship between soil deformation and pressure, or void ratio and pressure, and the relationship between deformation and time, thereby calculating the unit settlement, compression coefficient and index, rebound index, compression modulus, consolidation coefficient, etc. Compared to various lever-type consolidation devices, the fully automatic consolidation apparatus uses pneumatic loading, automatic constant pressure, automatic measurement of settlement deformation, and multiple units can be freely combined in parallel, allowing for simultaneous testing of up to 16 samples. It also comes standard with our fully automatic consolidation apparatus PC testing software, which enables automatic graded loading, wireless data acquisition, automatic calculation of test results, and can display various test curves and output reports.
Standards
1. T0137-1993 Uniaxial Consolidation Test Method and T-038-1993 Rapid Test Method in JTG 3430-2020 Standard for Geotechnical Testing of Highways.
2. Consolidation test methods in GB/T 50123-2019 Standard for Geotechnical Testing Methods.
16-Unit Automatic Pneumatic Consolidation Instrument Uniaxial Soil Consolidation Test Equipment Consolidation Device
Technical Specification
|
Power Supply Voltage |
AC 220V±10%, 50Hz |
|
Consolidation Test Channels |
Maximum 16 channels |
|
Sample Area |
30 cm², 50 cm² |
|
Soil Sample Height |
20 mm |
|
Input Air Pressure |
0.6~0.8 MPa |
|
Air Pressure Measurement Accuracy |
1.5 kPa |
|
Consolidation Pressure Control Accuracy |
0~100 kPa: 1.0 kPa; >100 kPa: <1% |
|
Pressure Control Range |
See Table 1.1 |
|
Wireless Communication Band (Consolidation Device & Main Controller) |
ISM Band 470 MHz |
|
Axial Settlement Measurement Accuracy |
0.01 mm |
|
Axial Settlement Measurement Range |
12.7 mm |
|
Dimensions |
Single consolidation device (medium pressure): 400×450×430 mmConsolidation tester controller: 500×470×400 mm |
|
Test Channel Control |
Supports simultaneous testing of up to 16 channels (8 consolidation devices total); each channel can be independently controlled and arbitrarily combined |
|
Axial Pressure Maintenance |
Constant pressure maintained by programmable proportional valve (high control accuracy) |
|
Settlement Deformation Measurement |
Measured by digital dial gauge (stable and accurate data) |
|
Consolidation Device Configuration |
Independent power supply, wireless data acquisition, series air pipe connection (simple installation, flexible placement) |
|
Main Controller Features |
10-inch touchscreen, simultaneous data display, LoRa wireless networking with consolidation device |
|
Built-in Component |
Silent air compressor |
|
Supporting Software |
Independently developed PC-based geotechnical testing software; supports fully automated testing, data acquisition & recording, parameter curve display, automatic calculation of test results (void ratio, unit settlement, compression coefficient, compression modulus, consolidation coefficient, resilience coefficient), and standard-compliant complete report output |
|
Note |
Standard computer is not included |
){kind=link}