| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
Suppliers with verified business licenses
ISO/TC160N63E Fully Automatic Float Glass Zebra Angle Tester Zebra Horn Tester Zebra Angle Tester
1. Introduction
FZT-2 fully automatic float glass Zebra Angle tester can replace the human eye and automatically read the float glass zebra Angle through the computer. The testing equipment belongs to the advanced technology at home and abroad.
Using virtual Mohr technology, this fully computerized test instrument is an essential tool for zebra Angle measurement in glass quality inspection. The FZT-2 Zebra Horn Tester tests all types of flat glass zebra horns according to the ISO/TC160N63E-83, JISR3202-1996, EN572-2 and GB11614-2009 standard testing methods.
The FZT-2 Zebra Angle tester is accurate, fast and easy to operate. The measurement range of zebra Angle is 0 ~ 75 degrees, the test accuracy is 0.2 degrees, the measurement repeatability is better than 1 degree, the thickness of the test sample glass is 1mm-19mm, the test result can show the position of the heaviest 5 glass bars. The FZT-2 Zebra Angle tester also provides manual and automatic measurement methods. In the automatic mode, the computer directly reads the zebra horn of the sample under test.
ISO/TC160N63E Fully Automatic Float Glass Zebra Angle Tester Zebra Horn Tester Zebra Angle Tester
2.Technical performance specification
1.2 The device is properly grounded
1.3 The working environment should be clean, the light is dark, no direct sunlight, the indoor environment should not change with the external environment, no dust, no strong vibration.
2. Equipment performance
|
Operating conditions
|
Single-phase AC power supply 220V 50Hz |
| Zebra screen size | 2400×1500mm |
| Zebra stripe width | 25mm |
| Dial accuracy | 1° |
| Test accuracy | 0.2° |
| Test repeatability | ≤1° |
| Test sample thickness | 1mm-19mm (special fixture must be used for ultra-thin glass) |
| can display the position of the heaviest 5 glass bars | |
ISO/TC160N63E Fully Automatic Float Glass Zebra Angle Tester Zebra Horn Tester Zebra Angle Tester
3.Function introduction
In order to facilitate the comparison between man and machine, the instrument has two functions: manual and automatic.
When using the manual measurement function of the FZT-2 Zebra Angle tester, the rotating glass bracket is controlled by the operator. The testing process is similar to the traditional zebra horn testing method. In the process of manual measurement, the operator controls the rotation of the rotating glass bracket through the computer keyboard. When the operator determines the critical Angle by pressing the keyboard, the Angle pointed by the pointer on the turntable is zebra Angle.
When using the automatic measurement function of the FZT-2 Zebra Angle tester, the operator only places the tested glass on the rotating bracket, and other testing work is automatically done by the instrument. The instrument will automatically determine the critical state of zebra stripe deformation, and the zebra Angle measurement results will be automatically displayed on the computer screen, along with the position of the five heaviest glass bars.
The FZT-2 automatic Zebra Angle tester, as a new type of test instrument in the glass industry, provides advanced optoelectronic technology and measurement methods. It provides stable, objective and accurate data for zebra horn test of flat glass. It has been widely praised by various glass enterprises. The equipment has been widely recognized and applied in glass quality inspection institutions, Qibin Group, Jinjing Glass Group, Xinyi Glass Group and other glass enterprises, and has become a necessary instrument in the test room.
){kind=link}