Engine Fuel Actual Gel Tester Actual Colloid Tester for Engine Fuel

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: PJZ8019
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Working Power Supply: AC(220±10%)V, 50Hz
• Test Hole Temperature: (229 ~ 235)℃
• Power: 9kw
• Rated Evaporation: 13kg/H
• Transport Package: Wooden Pakage
• Specification: 640mm× 480mm× 340mm
• Trademark: LONROY
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Engine Fuel Actual Gel Tester Actual Colloid Tester for Engine Fuel
1. Introduction
This instrument is designed and manufactured in accordance with the requirements of the national standard of the People's Republic of China GB/T 8019-2008 "Determination of fuel colloid content by injection evaporation method". It is suitable for the determination of the actual colloid content in aviation fuel by the method of steam evaporation medium according to the standard.
Select the appropriate air compressor, the instrument can also be according to GB/T 8019-2008 standard, using the method of air evaporation medium, used to determine the actual colloid content in aviation gasoline and automotive gasoline.

Engine Fuel Actual Gel Tester Actual Colloid Tester for Engine Fuel
2. Main technical features
1, the use of unique heating bath design technology, test bath gas path design is reasonable, heating evaporation effect is good.
2, the worktable is composed of stainless steel, a total of three test holes, steam bath by the pressure gauge display test hole air flow; In the air bath, the air flow rate of the test hole is displayed by the floating ball air flow meter, and the test of three samples can be carried out at the same time.
3, the instrument for the table structure, simple design, easy to use, equipped with electric heating steam boiler, fully in line with the actual aviation fuel colloid content test requirements.

Product Parameters

Engine Fuel Actual Gel Tester Actual Colloid Tester for Engine Fuel
3. Working principle
Host computer
1, working power supply: AC(220±10%)V, 50Hz, 2.5kW
2. Number of test holes: 3.
3, working temperature: steam bath, test bath temperature (232 ~ 246)ºC; Test hole temperature (229 ~ 235)ºC.
Air bath, test bath temperature (160 ~ 165)ºC; Test hole temperature (150 ~ 160)ºC.
4, Temperature control method: automatic temperature control.
5, Temperature display: digital display.
6, Flow display: steam bath, by the pressure gauge display; Air bath, by floating ball type air flow meter display.
7. Working pressure of air pressure reducing valve: 0.035MPa (for air bath).
8, Air source: steam bath, external electric heating steam boiler; Air bath, external compressed air, >(1000±150)mL/ SEC.
9, Shape size: 640mm×480mm×340mm (length × width × height, without thermometer frame).
Electrically heated steam boiler
(Air compressor can be configured to do the actual colloid test of automobile gasoline)

1. Model	LDRO.013-0.7.
2, rated evaporation	13kg/h
3, rated working pressure	0.7Mpa
4, working power supply	AC380V, 50Hz, 9000W (three-phase four-wire system, with zero line)

Detailed Photos