ASTM D4400 Bgd 225 Sagging Tester Stainless Steel Sagging Resistence Testing Machine for Flowability of Color Lacquers Paint Industry

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: BGD 225
• Type: Sagging Tester
• Accuracy Grade: 1
• Weight: 0.5kg
• Power Source: AC110V
• Transport Package: Wooden Package
• Specification: 850-1, 075μ m
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

ASTM D4400 BCD 225 Sagging Tester Stainless Steel Sagging Resistence Testing Machine for Flowability of Color Lacquers Paint Industry
1. Use
Sagging Tester produced by our company is in accordance with the specification of ASTM D 4400 and ASTM D 373. They are made of corrosion resistant stainless steel, the width of application is 75mm at 6mm per sagging thickness, and the gaps are being separated by a 1mm space as a marking on each sagging for distinctive identification of each sagging. 
They are applicable to determine the relative sag resistance of a series of paints in order to provide the technical parameters for the paint application on site.
 

Product Parameters

ASTM D4400 BCD 225 Sagging Tester Stainless Steel Sagging Resistence Testing Machine for Flowability of Color Lacquers Paint Industry
2. Main Technical Parameters
Clearance ranges

Ordering Information	BGD 225/1	BGD 225/2	BGD 225/3	BGD 225/4	BGD 225/5
Clearance Range	50-275μm	250-475μm	450-675μm	650-875μm	850-1,075μm

  Difference between adjacent two notches:25μm
 Comes with Calaibration Certificate.
 Weight: 0.5Kg
 
ASTM D4400 BCD 225 Sagging Tester Stainless Steel Sagging Resistence Testing Machine for Flowability of Color Lacquers Paint Industry
3. Manual
Drawdown the coatings on a material(glass, test chart or board)using the appropriates sagging Thickness Gauges, then place the coated material at vertical position(90º)to the platform(eg: table).Allow 10 to 30 minutes(depending on the viscosity)for the coatings to sag under gravity. Check out the coating thickness without the sagging effect and the next coating thickness with the sagging effect. With that information, the recommended coating thickness is between the 2 layers of coatings.
 

 

Detailed Photos