ASTM D3170 ISO 20567-1 JIS M0141 LSHJ-997 Stone Gravel Impact Resistance Tester
Uses
Equipment for conducting sand and gravel impact tests on automotive materials and their surface coatings
The gravel impact testing machine is specially designed and manufactured for the gravel and gravel impact resistance test of automotive materials and their surface coatings.
Test Piece and Standards
Active grille, camera, glass, painted parts, headlights, etc
GMW 1407, JIS M0141, TL211-6, GME 60 268, ASTM/D3170, SAE J400, FORD, Chrysler 463PB-39-01, GMW14668-3.4.9, Chrysler 463PB-52-01 GM 9119P/9508P/9619P, Mazda MES MN 601C, Nissan, Volkswagen, Toyota, ISO 20567-1
Requirements for Screw Air Compressors
1. Operating environment: Room temperature, < 80%RH;
2. Gas medium: Air;
3. Motor power: 7.5KW
4. Exhaust pressure: ≥1.25Mpa;
5. Exhaust volume: > 1m³/min
6. Power supply used: 380V/50Hz;
7. Transmission mode: Direct connection transmission;
8. Start-up mode: Variable frequency start-up;
9. Gas storage tank: Material: Stainless steel; Volume: At least 0.8 cubic meters; Safety valves and pressure gauges need to be equipped. Barrel diameter * height: 700*1905mm
10. Protective devices: High-temperature, high-pressure, blockage, overcurrent, phase loss, reverse phase, and unstable voltage protection devices are required.
Requirements for Gas Storage tanks
The air storage tank is used for buffering air and has a cooling function (the outlet temperature of the air compressor is approximately 70-80ºC). More importantly, it can initially remove water and oil. The storage tank can remove 70% of the oil and water. Therefore, for the air compressor, the air storage tank is an indispensable device. 0-1MPA (not less than 0.8MPA)
Configuration
The main unit, 3D component impact box, noise reduction component, flat specimen clamping component, SAE spray gun component, etc
Product Parameters
ASTM D3170 ISO 20567-1 JIS M0141 LSHJ-997 Stone Gravel Impact Resistance Tester
Product Parameter
PLC control system |
|
Operation interface |
Switch between Chinese and English |
Test software |
It can be upgraded for free remotely |
Sample setting |
All the samples are set to the spray area |
Time setting |
The spray time can be set from 0 to 999 seconds, and the pause time can be set during the spray |
Funnel |
Made of stainless steel and can hold about 0 to 10 kilograms of jet medium |
Control system and sample box |
Can be separated, flexible and moved to any position at will |
3D test chamber |
The SAE 45° impact chamber and VDA 90° impact chamber are equipped with anti-collision soft materials inside |
Additional system |
Add a pneumatic vibration system |
Jet medium |
Steel balls, pebbles, gravel, etc. can be selected at will |
Sample size |
Width ≤ 195mm, thickness ≤ 35mm, length ≤ 240mm (Different fixtures and sample sizes can be provided according to different products) |
Injection speed |
Adjustable from 0 to 1MPA |
Emission quantity |
Adjustable and the opening can be adjusted arbitrarily |
Pressure adjustment range |
0-1000kPa |
Speed adjustment range |
≥120km/h |
Emission quantity adjustment range |
≥1kg/min |
Adjustment range of the emission Angle |
45 to 90 degrees |
Injection pressure range |
0-1MPA. Other high pressures can be customized |
Sample testing angles |
For flat test samples, they can be tested at 45°, 90°, or 54°. Irregular samples should be tested in a 3D test chamber |
Jet gun |
45° and 90° |
Detailed Photos

