Protective Film Tear Film Voltage Tester Horizontal Type Tensile Strength Tester Horizontal Peel Strength Tester

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: LR-P01
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Weight: 0-100Kg
• Power Source: AC220V
• Spicimen Width: 50mm
• Transport Package: Wooden Package
• Specification: 1236*420*850mm
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Protective Film Tear Film Voltage Tester Horizontal Type Tensile Strength Tester Horizontal Peel Strength Tester
1.Product Use
The electrostatic tear film voltage tester is mainly used to determine the voltage value when the protective film is torn off.
Protective Film Tear Film Voltage Tester Horizontal Type Tensile Strength Tester Horizontal Peel Strength Tester
2.Features
1. It is convenient and safe, and can be used for measurement in narrow places and transported on the line;

2. The compensation voltage of the remover is checked in units of 1V (ion balance), and the large and bright liquid crystal display is displayed;

3. Simple operation button, fast and correct measurement; 

4. According to the balance metal plate of the shell, the balance of the ion separator can be detected;

5. The maximum voltage of the maximum form can be detected during the measurement of the variable electrostat.
 

Product Parameters

Motion control mode	5-inch touch control
Test angles	180 degrees
Voltage reading mode	Infrared voltage tester digital display reading
Signal Detection Method	Oscillation
Indicates the frequency of data updates	0.5 seconds at a time
The usual way	10V~19.99kV I.
Way B	1V~1999V
Test distance	30mm (between the measured and detection sections)
Test distance adjustment	Red LED light focus type (30mm focus distance of light mark)
Head turn angle	180 degrees (45° handles each)
Representation Department	Backlight encapsulates LCD display
Polarity indication	+ Polarity - Polarity indication
Switch mode	MODE button transition
Battery check	Indication part remnant indication
power supply	DC9V alkaline angle type dry battery
Operating temperature	0~40ºC
Solid size	68×22×138mm(W×D×H)
weight	230g (including battery)
fittings	Dedicated ground wire, 9V battery, box
Measure speed	100-10000mm/min adjustable
Valid itinerary	500 mm
Specimen width	50mm
Downtime mode	The upper and lower limits are set safely, and the breakpoint of the specimen is sensitized
Motor driven	Delta servo motor + Delta servo drive
Machine drive	Ball screw + linear guide
Machine power	400W
Dimensions of the machine	1363mm(W)×420mm(D)×850mm(H)
Use a power source	220V 50Hz
Standard configuration	A set of fixtures, a power cord, and a manual
remark	Please note that the oscillation type is very sensitive to shocks such as falling, and should not be used with strong impacts.

Detailed Photos