ED Xrf Energy Dispersive X-ray Fluorescence Spectrometer X-ray Spectrometer Gold Tester Xrf Spectrometer

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: AL-NP-5010A
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Transport Package: Wooden Package
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Basic principle of XRF analysis
The electron orbital potential energy of the various elements is different from each other excitation is different from each other,i.e.,each element emits x-rays with the specific energy of the atom of that element,which represents the characteristics of the element and is therefore called the characteristic X-ray of the element. The characteristic X-ray of each element has its specific energy, and the X-ray detected with certain energy can determine the existence of this element in the material sample.

EDXRF Energy Dispersive X-ray Fluorescence Spectrometer X-ray Spectrometer Gold Tester Xrf Spectrometer

5.Applications widely

Electronics, plastics, metal materials: various electronic components, hardware, plastic materials and products, circuit board etc.

Paper and paper materials: raw materials, various paper, toner, ink, etc.

Petroleum, coal: petroleum, lubricating oil, heavy oil, polymer, coal, coke, etc.

Ceramics, cement: ceramics, refractory materials, rocks, glass, cement, cement raw materials and raw materials, clinker, limestone, clay, etc.

Agriculture, food: soil, pesticide residues, fertilizer, plants, various food and so on.

Non-ferrous metals: copper alloys, aluminum alloys, lead alloys, zinc alloys, magnesium alloys, titanium alloys, precious metals, etc.

lron and steel: pig iron, cast iron, stainless steel, low alloy steel, high alloy steel, special steel, ferroalloy, iron ore, slag, electroplating solution, casting sand, etc

Chemical industry: inorganic organics and products, cosmetics, detergents, rubber, toners, catalysts, coatings, pigments, drugs, chemical fibers, etc.

Environment: all kinds of waste, industrial waste, atmospheric dust, industrial waste water, sea water, river water, etc.

Biological science: organisms. auxiliaries, etc.

EDXRF Energy Dispersive X-ray Fluorescence Spectrometer X-ray Spectrometer Gold Tester Xrf Spectrometer

6.Main component and technial parameters

The detection limit of harmful elements Cd, Pd, Cr, Hg and Br is restricted according to ROHS instruction
Detection limit (Cd, Pd, Cr, Hg, Br): 2ppm

 

Si(PIN) or SDD detectorThe resolution of detector is one of the main indexes to evaluate the performance of energy dispersive XRF spectrometer. Resolution< 145eV (The lower the resolution, the higher the sensitivity.)

Counting rate >1000/S Crystal area > 15m²  Beryllium window thickness = 0.025mm

Detector power< 1.2W

Multi-channel analyzerNumber of channels: 2048 channels

Power controllerSystem power control: +5 VDC at 250 mA(1.2 W)

Constant cooling control: 400 VDC

 

X ray tubeThe X-ray tube, specially treated with embedded lead inside is shielded in full range, leaving only the side window for the x ray outlet. The canned insulating oil is used for high voltage insulation and cooling, 0.005 inch Beryllium window,rated consumption power 50W, rated power 50kV. Designed service life >15000h.

High voltage generator

Input: 85 ~ 265VAC, 47 ~ 63Hz, Power factor correction.1kV ~ 5kV comply to UL85 ~250VAC input standard Voltage variation: 0.01% of output voltage from no load to full load

Current variation: 0 ~rated power, 0.01% of output current Ripple: Peak - peak of output voltage 0.25% Temperature variation:voltage or current setting, 0.01%/oC

Stability: 0.05%/8h after warming-up for half an hour

EDXRF Energy Dispersive X-ray Fluorescence Spectrometer X-ray Spectrometer Gold Tester Xrf Spectrometer

7.Technical parameters

Model		Al - NP - 5010A
Anylysis principle		Energy dispersive X-ray fluorescence analysis
Element measuring range		Any element from Na(11)~U(92)
Min. measuring limit		Cd/Hg/Br/Cr/Pb ≤ 2ppm
Sample shape		Arbitrary size, any irregular shape
Sanple type		Plastic/metal/film/powder/liquid etc
X ray tube	Target material	Mo
	Tube voltage	5-50KV
	Tube current	1-1000μA
Sample exposure diameter		2, 5, 8mm
Detector		Si-PIN or SDD detector, high speed pulse height analysis system
High voltage generator		Special HV genetator for X fluorescence
ADC		2048 channels
Filter		6filters are automatically selected and converted
Sample observation		200 * color CCD camera
Analysis software		Patented software products, free upgrade for life
Analysis method		Theoretical α coefficient method, basic parameter method, empirical coefficient method
Analysis time		30-900 seconds, adjustable
Operating system software		WINDOWS XP
Data processing system	Host	PC business model
	CPU	≥ 2.8G
	Memory	≥ 2G
	CD-ROM	8*DVD
	Hard disk	≥ 500G
	Display	22″ or 24″ LCD display
Working enviroment		Temperature 10-35 ºC, humidity 30-90% RH

Company Profile