Automatic Terminal Section Analyzer Terminal Cross-Section Analysis System

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: LR-MQ-500E
• Type: Analytical Balance
• Accuracy Grade: 1
• Weight: 30 Kg
• Power Source: AC220V
• Transport Package: Wooden Package
• Specification: 500mm (l) x 350mm (W) x 350mm (H)
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Automatic Terminal Section Analyzer Terminal Cross-section Analysis System
1. Introduction
This wire harness terminal profile analyzer adopts seven-inch touch screen interface to intelligently cut and grind, ensuring the smoothness of cutting and grinding, and greatly reducing the error and time of personnel operation. Only need to input product diameter, one key cutting grinding.

2. Features
1. Use linear guide rail to ensure installation accuracy.
2. The motor adopts horizontal installation to ensure small swing of rotation.
3. Laser infrared counterpoint ensures fast alignment of cutting position.
4. Optional XY mobile working platform with 360 degree rotating table, convenient terminal section sampling.
5. Add drainage system, easy to clean the machine.
6. Fixture front, easy to install and adjust.
7. Trigger switch to ensure personnel safety.
8. Adopt 5 million pixel industrial camera, which can collect hd dynamic pictures.
9. Built-in measurement standard analysis software, fast report export.
10. Use seven-inch touch system, intelligent cutting program
11. Up to 30 groups of programs saved
12. Add button operation and prolong service life.

Product Parameters

Automatic Terminal Section Analyzer Terminal Cross-section Analysis System
3. Main technical indicators

1. Cutting module
Wire diameter range		(ø 0.10mm - ø 20.00mm including terminal)
Speed		2800 RPM
Cutting speed		automatically adjustable
Cutting wheel		φ105 x 0.5 xφ16mm
2. Polish the module
Speed		1400 RPM
Z fine tuning range		0.0mm to 20.0mm (automatically adjustable)
Abrasive paper		Diameter 100mm 1000# 2000# 3000# (optional)
3. Corroded part
Professional terminal section cleaning liquid
Corrosion time		5 to 30 SEC
4. Picture intake and analysis
5 megapixel industrial camera High quality, low distortion stuck lens Standard magnification: about 36-230x (can be digitally enlarged to 500X) Objective lens intertooth multiples: 0.7x,1x, 2x, 3X, 4x, 4.5x Ultra bright white LED light source adjustable control
5. Analysis and archiving
V3.2 version of the measurement software, including compression ratio, such as enhanced measurement tools.
6. The power supply
230 VAC, 50Hz, 600 w
7. Volume and weight
Weight	about 30 kg
Volume	500mm (l) x 350mm (W) x 350mm (H)
8. Software Functions
Compression ratio, number of wire harness, crimping height, crimping width, sectional area, support height, support Angle, burr width, burr height, etc

4. Standard equipment configuration
1. One automatic cutting and grinding machine
2. 5 million industrial camera 1 set
3. One set of 0.7x-4.5x variable industrial lens with megapixel grade
4. 1 set of adjustable bracket
5. LED adjustable surface light 1 set
6. One special fixture for terminals
7.105*0.5mm ultra-thin imported cutting pieces 5 pieces
8. 30 pieces of abrasive paper
9. 250ml One bottle of special cleaning solution for end face corrosion
10. 5 packs of clean cotton swabs
11. One set of special measuring software for terminal section analysis
12. High precision optical glass correction block 1 piece
13. Replace 2 spanners for cutting pieces
14. One stainless steel scrap collection plate
15. Remove dust with a small brush
16. One software manual
17. Several terminal industry standards (electronic version)

Detailed Photos