| Customization: | Available |
|---|---|
| After-sales Service: | Online |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Terminal Cutting and Grinding Machine Terminal Section Analyzer Test Crimping Terminal Quality
1. Introduction
The terminal section analyzer adopts marble base, which makes the cutting and grinding machine work more stable. The motor adopts horizontal installation, which is convenient for cutting and grinding. The y-direction large range is adopted, and the cutting range is larger. Water spraying device can be added, which is suitable for cutting and grinding of large terminals of wire harness of more new energy vehicles. The cutting motor and the moving device of the terminal section analyzer are installed on the marble, and the accuracy of installation is guaranteed by meter making, so that the flatness of cutting and grinding is greatly improved.
2. Features
1. Use linear guide rail to ensure installation accuracy.
2. The motor adopts horizontal installation to ensure small swing of rotation.
3. Adopt grade 00 marble base to ensure alignment with cutting position.
4. Optional XY mobile working platform with 360 degree rotating table, convenient terminal section sampling.
5. Add dustproof system, easy to clean the machine.
6. Fixture front, easy to install and adjust.
7. Trigger switch to ensure personnel safety.
8. Hook&loop sandpaper, quick replacement.
9. Adopt 3 million pixel industrial camera, which can collect hd dynamic pictures.
10. Built-in measurement standard analysis software, fast report export.
Terminal Cutting and Grinding Machine Terminal Section Analyzer Test Crimping Terminal Quality
3. Main technical indicators
| 1. Cutting module | ||
| Range | 0.01mm2 to 100.00mm2 (ø 0.10mm - ø 20.00mm) | |
| Speed | 2800 RPM | |
| Cutting speed | manual adjustable | |
| Cutting wheel | φ110 x 0.5 xφ20mm | |
| 2. Polish the module | ||
| Speed | 1400 RPM | |
| Z fine tuning range | 0.0mm to 20.0mm | |
| Hook&loop abrasive paper | 100mm 1000# 2000# (optional) | |
| 3. Corroded part | ||
| Professional terminal section cleaning liquid | ||
| Corrosion time | 5 to 30 SEC | |
| 4. Picture intake and analysis | ||
| 3 megapixel industrial camera | ||
| High quality, low distortion stuck lens | ||
| Standard magnification | about 20-200x | |
| Interdentate multiples | 0.7x,1x, 2X, 3X, 4x, 4.5x | |
| Standard observation range | 0.01mm2 to 50.00mm2 | |
| Ultra bright white LED light source adjustable control | ||
| 5. Analysis and archiving | ||
| V3.2 version of the measurement software, including compression ratio, such as enhanced measurement tools. | ||
| 6. Power supply | 230 VAC, 50Hz, 600 w | |
| 7. Volume and weight | ||
| Weight | about 30 kg | |
| Volume | 500mm (l) x 350mm (W) x 350mm (H) | |
| 8. Software Functions | ||
| Compression ratio, number of wire harness, crimping height, crimping width, sectional area, support height, support Angle, burr width, burr height, etc | ||
){kind=link}