Video Extension Rate Tester Contact Video Elongation Testing Machine Tester

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: LR-U16
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Weight: About 100kg
• Power Source: AC220V
• Total Power: About 400W
• Transport Package: Wooden Package
• Specification: about 150×230×300cm(W×D×H)
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Video Extension Rate Tester Contact Video Elongation Testing Machine Tester
1.Uses
Widely used in rubber and plastics, polymer materials, adhesives, adhesive tapes and other industries, suitable for testing the tensile strength, elongation, elastic modulus, compressive strength, compression ratio and so on of samples under different conditions of room temperature, low temperature and high temperature. use

Product Parameters

Capacity	50N; (Other capacities optional)
Display	Computer display mode
Power resolution	1/1,000,000
Force Accuracy	0.03%
Accuracy class	0.5 class
Stroke resolution	1/1,000,000
Control mode	full computer operation mode
Test speed	0.01~500mm/min computer setting, with fixture up and down quick adjustment button
Force unit conversion	gf, N, Ibf, g, ton, Mpa
Shutdown mode	overload shutdown, emergency stop button, automatic shutdown of specimen destruction, automatic shutdown of upper and lower limit setting, automatic reset function
Machine size	about 150×230×300cm(W×D×H)
Machine power	servo motor drive, synchronous wheel and precision ball screw drive
Total power	about 400W
Weight	about 100kg
Electricity	220V 50/60HZ
Standard configuration	1 set of tensile fixtures, 1 set of video extensometers, software, computer connection,
Option	PC

Video Extension Rate Tester Contact Video Elongation Testing Machine Tester
2.Extensometer Introduction
Large deformation video extensometer is a non-contact high-precision real-time large deformation measurement system, which uses a separate digital camera and real-time image processing algorithm, by taking images of the experimental process of the specimen, analyzing the changes of image features, and can dynamically measure strain, displacement and other data in real time, adapting to 1000% and above large deformation tests, especially suitable for rubber, film and other tests, supporting signal communication with the testing machine, measuring various mechanical performance parameters such as stress-strain curves, and can be used for all kinds of large deformation mechanical tests.

Video Extension Rate Tester Contact Video Elongation Testing Machine Tester
3.Peculiarity
Non-contact measurement: Avoid the additional influence of contact means such as strain gauges, clamping extensometers, etc
Whole process tracking: no need to stop the whole process, the sample fracture will not damage the measuring device, and the whole process can be tracked
Diversified scenarios: In addition to general scenarios, it can also adapt to special experiments such as large deformation, small deformation, high and low temperature
Wide adaptability of materials: There is basically no restriction on materials, and tests can be carried out for specimens of different sizes and materials
Sub-pixel measurement accuracy: Based on the image processing correlation method, the calculation accuracy reaches the sub-pixel level.
Large strain range: Measurable strain ranges from 0.002% to >1000%, far exceeding traditional methods
Gauge customization: Customize the gauge size, and set it arbitrarily within hundreds of millimeters
Easy to make: no need to paste markers, marking can be made quickly and simply, and large deformation marks can be guaranteed to not fall off
Multi-directional simultaneous measurement: longitudinal and transverse strains can be calculated at the same time
Multi-point co-measurement: It can measure the strain at multiple points, which is suitable for multi-sample detection, multi-bid testing, etc

Detailed Photos