ISO1133 Mfi Melt Flow Index Tester Melt Flow Rate Mfr Mvr

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: Lr-A001
• Weight: 0-100Kg
• Power Source: AC220V
• Temperature Fluctuation: ±0.2 ºC
• Temperature Uniformity: ±1ºC
• Transport Package: Wooden Package
• Specification: Inner hole 9.55± 0.025mm
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

ISO1133-97 ASTM D1238 Melt Flow Index Tester/Mfi Testing Machine Melt Flow Rate (MFR) Melt Volume Flow Rate (MVR)
1.Introduction
Melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.

ISO1133-97 ASTM D1238 Melt Flow Index Tester/Mfi Testing Machine Melt Flow Rate (MFR) Melt Volume Flow Rate (MVR)
2.Standard
GB/T3682-2000, ISO1133-97, ASTM D1238
 

Product Parameters

ISO1133-97 ASTM D1238 Melt Flow Index Tester/Mfi Testing Machine Melt Flow Rate (MFR) Melt Volume Flow Rate (MVR)
3.Specification

Model	LR-A001-A
Barrel parameters	Inner hole 9.55±0.025mm
Pistons parameters	Piston head:  9.475±0.015mm
Outlet length	8.000±0.025mm
Paramters	Extrusion hole 1=2.095±0.005mm
Temperature parameter	With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade
Temperature range	Room Temperature~450degree centigrade
Temperature fluctuation	±0.2 ºC
Temperature uniformity	±1ºC
Temperature display resolution	0.1ºC
Display resolution	0.1ºC
Maximum comsuption	< 600W
Time display resolution	0.1s
Weight parameters are as follows:
Weight accuracy	±0.5%
Basic configuration	A    0.325kg
	B    1.2kg
	C    2.16kg
	D    3.8kg
	E     5kg
	F     10kg
	G    12.5kg
	H     21.6kg
Position detection
Loop distance from up and down	30mm
Control precision	± 0.1mm
Test flow control
Times of cutting the material	0~10 times
Material cutting interval	0~999s(set reference Table 2)
Control flow reaches the set temperature without volatility
Barrel temperature time	15 min.
Material be installed	1 min.
Material sample temperature recovery time	4 min.
When binder set	1min
Output mode	Micro-automatic print output
Cut material methods	The hand automatic cut into one body
Test load	Eight sets of weights
Power	AC220V±10%   50/60HZ

Detailed Photos