Constant Temperature and Humidity Retention Testing Machine of Tape Adhesion Test

• Customization: Available
• After-sales Service: Online
• Warranty: 1 Year
• Model NO.: LR-S20
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Weight: 0-100Kg
• Power Source: AC220V
• Humidity Range: 20%~98%Rh
• Transport Package: Wooden Package
• Specification: W78× H157× D105cm
• Trademark: Lonroy
• Origin: China
• HS Code: 9024800000
• Production Capacity: 200

Product Description

Product Description

Constant Temperature and Humidity Retention Testing Machine of Tape Adhesion Test
a. Adopt cold balance system, long-term operation without icing, to meet the adhesion test of all tapes under different temperature and humidity;
b. The sink is made of special materials, the thermal conductivity is small, and the surface will not be attached to water beads (such as water beads will form on the surface of metal materials, and it is easy to wet the sample when it drips, affecting the test effect), and it is equipped with a diversion device, if the internal pressure of the sink is too large or the water level is too high, it will flow into the humidification barrel from the diversion hole.
c. The machine is exquisite, the internal space is large, the external size is small, the width is only about 78CM, and the laboratory with a single door can be easily entered. d. There is a pressure relief hole at the top.

Constant Temperature and Humidity Retention Testing Machine of Tape Adhesion Test

Temperature range	-20ºC~150ºC
Humidity range	20%~98%RH
Heating time	-20ºC~+100ºC within 40min (no load)
Cooling time	+20ºC~-20ºC within 40min (no load)
Control stability	temperature ±1.0ºC, humidity ±1.0%RH
Control uniformity	temperature ±2.0ºC, humidity ±3.0%RH

Temperature and humidity range diagram

Temperature rise and fall performance curve
Second, the structure
Size
a. Internal size: W50× H50×D40cm.
b. External size: W78× H157×D105cm

c. Space requirements: W140× H200× D137cm
III. Machine features
a. Adopt cold balance system, long-term operation does not freeze, meet the adhesion test of all tapes under different temperature and humidity;
b. The sink is made of special materials with small thermal conductivity and no water droplets on the surface (such as metal materials, water droplets will form on the surface, which will easily wet the sample and affect the test effect). It is also equipped with a diversion device. If the internal pressure of the sink is too high or the water level is too high, it will flow into the humidification bucket through the diversion hole.
c. The machine is exquisite, with large internal space, small external size, width of only about 78CM, and easy access to single-door laboratories.
d. Pressure relief holes are attached to the top.
 

Detailed Photos